Comparative Study of Magnesium, Calcium, and AluminiumSilicate Based Post-Sealing Treatments on Zinc PhosphateCoatings
DOI:
https://doi.org/10.56802/ae2trj40Keywords:
Postoperative myalgia,, Rocuronium,, Rocuronium priming,, Succinylcholine, VecuroniumAbstract
Post-sealing is an important post treatment performed after phosphating to reduce coating
porosity and enhance corrosion resistance through the formation of an additional protective
barrier layer. In the present study, a comparative investigation of magnesium silicate, calcium
silicate, and aluminium silicate post-sealing treatments on zinc phosphate coatings developed
over mild steel was carried out. Zinc phosphating was performed using a conventional
phosphating bath followed by silicate-based post-sealing treatments. The surface morphology
and elemental composition of the coated samples were characterized using scanning electron
microscopy (SEM) and energy dispersive spectroscopy (EDS), while phase analysis was
conducted using X-ray diffraction (XRD). The corrosion behavior of the coatings was
evaluated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS)
in 3.5% NaCl and 0.1 N H₂SO₄ solutions. The results revealed that zinc phosphating produced
a porous crystalline phosphate coating on the mild steel surface, whereas post-sealing
treatments reduced coating porosity and improved surface compactness




